Chuwi HI9 Tablet PC ROM Download and Install Tutorial

1

Chuwi right now has released new model in its hi series, the Chuwi  HI9, we have also made review about it which proves it is good tablet pc,  It is equipped with a 8.4 inch 10-point touch display, brings your photos and videos to life. Android 7.0 OS ensures you more wonderful user experience. Powered by MTK8173 quad core 1.9GHz processor, offers you smooth operation and stable multitasking experience. Rear-facing + front dual camera for capturing memorable moments and high quality pictures in daily life. Right now Gearbest is holding its 4th anniversary to sell HI9 at only $197.22, cheaper than before. Below is about Chuwi hi9 ROM install tutorial.

system:
http://www.mediafire.com/file/orumsngce0ap1le/M84%28Hi9%29_20180306_7.0%28english%29.zip
http://www.mediafire.com/file/odn8rixm01np9qe/0308.rar

Software Requirements:

1.Windows XP SP3 or Win 7, please make sure sp3 has been installed on Windows XP
2. Because this is a driver, make sure that the installed user has the rights of administrators ;

One-touch installation program
Please refer to the compressed installation files;

a)Huaqin Android Driver All-in-One\32 bit\Huaqin Android Driver All-in-One 32 bit V1.00.exe
b)Huaqin Android Driver All-in-One\64 bit\Huaqin Android Driver All-in-One 64 bit V1.00.exe

Please note that the 32-bit system should use the 32-bit installer, and 64-bit system should use the 64-bit installer;
(Win 7 32bit) Installation instructions

1.Please find the driver installation file under the installation directory:
Huaqin Android Driver All-in-One\32 bit\Huaqin Android Driver All-in-One 32 bit V1.00.exe
2.  Start the interface, click Next to proceed to the next step

3. Waiting for the installation, click the Install button

4. Win 7 UAC will be effective after that, and allows users to confirm the installation, click “OK”

5. Since most of the drivers packaged in the installer have not undergone Microsoft certification, the following window will pop up, click “Always install this driver software.” And because there are multiple drivers inside, this window will pop up multiple times, please click “Always install this driver software”:

6.Installation completed

7.Driver has been installed on Win7 , there’s no need to install again when using the Flash Tool (download tool) Meta (write number tool), ADB (debug tool) because it will automatically find the device and install automatically.

 (Windows XP) Installation instructions
Please find the driver installation file under the installation directory:
1.
Huaqin Android Driver All-in-One\32 bit\Huaqin Android Driver All-in-One 32 bit V1.00.exe
Start the interface, click Next to proceed to the next step
2.

Waiting for the installation, click the Install button

3.

Since most of the drivers packaged in the installer have not undergone Microsoft certification, the following window will pop up, click “Always install this driver software.” And because there are multiple drivers inside, this window will pop up multiple times, please click “Always install this driver software”:

4.

5.Installation completed

6.Now driver on Win XP has been installed, unlike Win7,you will still need to choose manually while using Flash Tool, Meta, and ADB.

7. ADB driver
”When the phone is connected to the PC, the following window will pop up, please select “No, not for now”

Select “automatically install the software (recommended)” on the pop-up ADB driver selection window

ADB driver has been installed automatically :

8. RNDIS driver, you need to click the automatic driver installation button to complete the installation

9.Downloading the driver is same as meta, please select “Automatically install the software (recommended)” on the pop-up window.

Uninstall the driver (if you don’t need it after flashing the system)

1.Open the Control Panel -> Programs -> Programs and Features -> Uninstall a program:

2.

3.Choose “HuaqinAndnroid Driver All-in-One for Huawei 32bit and click uninstall

4. Uninstallation completed

二. Begin flashing your Hi9
1.Open flash_tool and get started

2.  Load the file
a. Load the BIN file MTK_AllInOne_DA
b. Load the document text in the firmware package MT8173_Android_scatter
c. Change the upgrade mode to Firmware Upgrade, click Download.
Hi9 Tablet will start flashing automatically connected to the computer when power off, and it will turn on automatically after the success of flashing.

Share.

1 Comment

Reply To val Cancel Reply