The VAPORESSO VAST is a refillable open-system device available in two configurations: a standard version with a 10ml pod and a TPD-labelled version that separates the same stated total capacity into a 2ml pod and an additional 8ml refill container.
Although both versions belong to the same product family, their packaging and liquid-storage arrangements are different. This distinction matters when comparing retailer listings, checking replacement components, or identifying which version is intended for a particular market.
The TPD version is particularly worth understanding because its two-part capacity design can be confusing if a product listing only mentions the combined 10ml figure. Here is how the configuration works, what remains the same between versions, and what buyers should verify before ordering.
1. What Does the Vaporesso VAST TPD Version Actually Include?
The most important difference is the way the e-liquid capacity is divided.
According to VAPORESSO’s official specifications, the standard VAST uses a single 10ml refillable pod. The TPD-labelled configuration instead consists of:
- One 2ml VAST pod
- One separate 8ml VAST refill container
Together, these components provide a stated total capacity of 10ml. However, the 8ml container should not be mistaken for an ordinary replacement pod. It is a separate component included in the TPD kit.
This distinction is important when reading online product descriptions. A retailer may advertise the device as a 10ml system, but that does not necessarily mean the version being sold contains one 10ml pod.
| Configuration | Pod capacity | Additional container | Combined stated capacity |
|---|---|---|---|
| Standard VAST | 10ml | Not included | 10ml |
| VAST TPD version | 2ml | 8ml | 10ml |
The combined figure describes the system’s stated capacity, not the capacity of the pod by itself.
2. Why Does the TPD Version Use a 2ml Pod and an 8ml Container?
TPD stands for the European Union’s Tobacco Products Directive, which establishes requirements for certain tobacco and related products, including nicotine-containing electronic cigarettes.
Under Article 20 of Directive 2014/40/EU, nicotine-containing liquid in electronic cigarettes is subject to volume limits. Cartridges and tanks must not exceed 2ml, while dedicated refill containers must not exceed 10ml.
This regulatory framework helps explain why manufacturers may develop different hardware configurations for different markets.
The VAST TPD version follows a divided-capacity arrangement: a 2ml pod is paired with a separate 8ml refill container. Instead of putting the entire stated 10ml capacity into one pod, the system uses two distinct components.
There is an important distinction here: a product being labelled TPD does not, by itself, prove that every version, accessory, liquid, or retail listing complies with all applicable local requirements. Market-specific notifications, packaging, product configuration, and national rules still matter.
For buyers, the practical lesson is simple: check the exact version and its included components rather than relying on the total capacity shown in a headline.
3. What Comes in the VAST TPD Package?
VAPORESSO lists different package contents for the standard and TPD versions.
The standard kit includes:
- One VAPORESSO VAST battery
- One VAST Series pod
- One user manual and warranty card
The TPD kit includes:
- One VAPORESSO VAST battery
- One VAST Series pod
- One VAST refill container
- One user manual and warranty card
The additional refill container is the key packaging difference. If a retailer advertises the TPD version but does not clearly identify this component, it is worth checking the listing or contacting the seller before placing an order.
Also check whether the product photographs show the actual regional package. Some stores use general VAST promotional images that may not accurately represent the contents of every version.
4. Which Main Specifications Are Shared by Both Versions?
The TPD configuration changes the pod and refill-container arrangement, but VAPORESSO presents the main device platform as part of the same VAST family.
The official specifications include:
| Specification | VAPORESSO VAST |
|---|---|
| Product type | Refillable open-system device |
| Battery capacity | 1,600mAh |
| Maximum output | 30W |
| Charging port | USB Type-C |
| Charging input | DC 5V/2A |
| Dimensions | 112 × 40 × 25.2mm |
| Weight | 87.5g |
| Standard pod | 10ml |
| TPD pod | 2ml |
| TPD refill container | 8ml |
| Integrated resistance options | 0.8Ω, 0.6Ω and 0.4Ω |
The device also features adjustable airflow and three power modes. Three white LED indicators represent the selected power level: one for ECO, two for NOR, and three for PWR.
These specifications describe the VAST platform. Buyers should still confirm that a particular retailer’s listing corresponds to the exact regional package they intend to purchase.
For a closer look at the device’s overall design, battery, and Tri-Core Mesh system, read our VAPORESSO VAST Kit review.
5. Understanding the Tri-Core Mesh Pod
One of the VAST’s central design features is its Tri-Core Mesh technology. Rather than requiring users to choose between several separately listed resistance pods, the system integrates three resistance configurations into one pod.
VAPORESSO identifies the three options as:
0.8Ω – ECO Mode
The ECO setting is positioned as the lower-power option. The manufacturer associates this resistance with nicotine-salt e-liquid and a smoother, more restrained output.
0.6Ω – NOR Mode
The NOR setting is presented as the middle option, balancing the device’s power and output characteristics.
0.4Ω – PWR Mode
The PWR setting is designed for a higher-output experience. VAPORESSO specifies freebase e-liquid with a VG content below 70% for this configuration.
The three options give the pod a broader operating range, but the resistance and mode descriptions should be treated as manufacturer specifications rather than independent performance test results.
It is also important to distinguish the pod’s resistance options from its capacity. The 2ml TPD pod and 10ml standard pod are different capacity configurations; the three-resistance design does not mean that every VAST package contains both pod sizes.
6. What Does the One-Second Priming Claim Mean?
Traditional refillable pods may require a waiting period after filling so that e-liquid can saturate the coil’s wicking material. Starting too soon can contribute to dry or unpleasant heating.
VAPORESSO promotes the VAST with a one-second priming claim, describing a design intended to allow the device to be used shortly after filling.
The company also advertises CoreGuard technology, which uses a coating intended to protect the heating element against e-liquid corrosion. Its SSS 3.0 system is presented as a leak-resistance feature.
These are manufacturer claims, not guarantees that leakage, premature wear, or dry heating can never occur. Actual results can depend on the liquid, operating conditions, component condition, and correct handling.
The manufacturer also states that a pod can support up to six refills and advertises a tested lifespan of up to 150,000 puffs. Such figures should be understood as claims made under the company’s testing conditions, not guaranteed service life or a prediction of normal real-world use.
7. Four Things to Check Before Ordering the TPD Version
A product title alone may not provide enough information to identify the correct VAST configuration. These checks can help avoid ordering the wrong package.
Check 1: Confirm the Pod Capacity
Look for an explicit reference to the 2ml TPD pod. If the listing only says 10ml, ask whether it refers to the standard pod or the combined capacity of the TPD configuration.
Check 2: Confirm the 8ml Refill Container Is Included
The refill container is a separately listed component in the official TPD package. Do not assume it is included simply because a seller mentions a 10ml total capacity.
Check 3: Verify Regional Availability and Product Documentation
The TPD label is relevant to a regulatory framework, but local requirements can differ and may change. Check the applicable market’s product notification information, packaging details, warnings, and seller documentation.
For EU regulatory background, consult Article 20 of the Tobacco Products Directive on EUR-Lex.
Check 4: Check Replacement-Part Compatibility
Before purchasing additional pods or refill containers, confirm that the component is specifically listed for the VAST. Similar-looking accessories from another VAPORESSO product family should not be assumed to fit.
The product name, capacity, and compatibility information should match the device version being sold.
8. Standard VAST vs TPD Version: Which Listing Are You Looking At?
The two configurations are easier to identify when their packaging and capacity details are compared side by side.
| Detail | Standard version | TPD version |
|---|---|---|
| Pod capacity | 10ml | 2ml |
| Separate refill container | No | 8ml |
| Battery | 1,600mAh | 1,600mAh |
| Maximum output | 30W | 30W |
| Tri-Core resistance options | 0.8Ω / 0.6Ω / 0.4Ω | 0.8Ω / 0.6Ω / 0.4Ω |
| Package includes refill container | No | Yes |
The key difference is not the battery or the overall device design. It is the way the liquid capacity is divided between the pod and the separate container.
For anyone comparing online listings, this is the detail that deserves the most attention.
If you are also comparing the VAST with another refillable pod platform, see our Vaporesso VAST vs XROS 6 comparison for a breakdown of their pod capacities, batteries, and designs.
Final Thoughts
VAPORESSO VAST TPD version is not simply the standard model with a different label. Its 2ml pod and separate 8ml refill container create a distinct package configuration, even though the manufacturer lists a combined capacity of 10ml.
The most useful step when checking a retailer listing is to confirm three things: the pod is the 2ml version, the 8ml refill container is included, and the package is intended for the market where it will be sold.
The VAST also shares several headline specifications across the product family, including a 1,600mAh battery, up to 30W output, and the Tri-Core Mesh pod design. However, regional packaging and local regulatory requirements should always be checked separately.
Note: This guide is for factual product and regulatory information only. E-cigarettes are not risk-free, and nicotine is addictive. These products are intended only for adults where legally permitted and should not be used by minors or non-smokers.