Alldocube, the brand that was generally known as Cube 3 years ago has several interesting tablets on the market today. But these new budget tablets they’re launching is not one of them with Android 9.0 OS. Called the Alldocube iPlay10 Pro and iPlay8 Pro, it’s hard to figure out what they even bother to manufacture it, other than getting some components dirt cheap. Both are completely mid-range for being produced in the middle of 2019. It starts out interesting, as an Android 9.0 tablets. In this article, we will see What’s the difference between Alldocube iPlay10 Pro vs iPlay8 Pro? Let’s check out quickly comparison review of both devices here.
Design
Alldocube iPlay8 Pro sports an 8-inch IPS display with 16:10 aspect ratio is the best choice for single hand-held whether to read, a resolution of 1280 × 800 pixels that is accompanied by a 0.3MP webcam while in the back we have a 2MP camera with flash., watch videos or browse webpages. It features a 178-degree full-view HD IPS screen showcases more vibrant and detailed pictures. Finally, the weight of the Alldocube iPlay8 Pro is 345gr and its maximum thickness is 8.9mm,
And Alldocube iPlay10 Pro sports a10.6-inch IPS (not specified if OGS) with a resolution of 1920 x 1200 pixels and automatic brightness control, is accompanied by a 2 MP front webcam and in the back, we have a 5-camera MP with autofocus somewhat better than the previous ones, watch videos or browse webpages. It features a 178-degree full-view HD IPS screen showcases more vibrant and detailed pictures. Its weight is 510 g and its dimensions are 25 x 17 x 0.9 cm as usual in this range.
Hardware
The Alldocube iPlay8 Pro tablet is powered by a Mediatek MT8321 Quad Core SoC, a chip manufactured in 28nm with ARM Cortex-A7 processors that reach up to 1.3 GHz of speed and that integrates a Mali 400mp2 GPU. We also find 2GB of RAM and 32GB of storage memory, which can be expanded thanks to the included microSD card reader. An input range configuration that will allow us to move most apps and games with little graphics load.
And The Alldocube iPlay10 Pro tablet includes as main engine a Quad Core SoC from Mediatek MT8163, which integrates ARM Cortex-A53 processors capable of reaching 1.5Ghz and an ARM Mali-T720 MP2 GPU. In this model, the memory has been increased to 3 GB of RAM and we have the same 32 GB of storage memory that we can expand thanks to the microSD card reader that we find in one of the sides of the tablet. A correct configuration to navigate without problems, use apps and run games like PUBG but without putting them to the maximum.
Features
Alldocube iPlay8 Pro includes Dual Band WiFi, Bluetooth 4.0, GPS, FM Radio, 5500 mAh battery and a modem with support for 2G / 3G and Dual SIM networks. In terms of connectivity, we find the typical 3.5 mm audio jack, OTG microUSB port for data and charging, which is normal in this input range of tablets. The operating system installed is Android 9.0.
And Alldocube iPlay10 Pro accompanied by a 2 MP front webcam and in the back, we have a 5-camera MP with autofocus somewhat better than the previous ones. In the connectivity section, we find a microSD card reader, 3.5mm audio jack, microUSB OTG port, independent DC connector for charging and output of microHDMI video. The operating system installed is Android 9.0, it has dual-band wifi a / b / g / n, Bluetooth 4.0, GPS and 6600mAh battery.
Conclusion
According to several aspects comparison between Alldocube iPlay10 Pro and iPlay8 Pro, they are both budget Android 9.0 OS Tablets which is affordable, Both comes with different specs you can check out. So according to what exactly you might be looking, you can find, in Design, Hardware, and Features. According to the overall comparison with Alldocube iPlay10 Pro vs iPlay8 Pro, you will know the main difference and similarity. For more details, check out Alldocube iPlay10 Pro and Alldocube iPlay8 Pro on the official page.
