The Makerfire is a small racing drone, mainly for indoor use, that features a camera on it.
The Makerfire weights just 22 grams and the wheel base dimensions are 64mm. The 4 propellers are well protected from hits, carefully-tuned. On the top of the drone, we see a small 1/4 Inch 5.8G AIO 25mW camera, with 10° tilt camera mount. For control comes with the F3 EVO Brushed FC with Native DSM receiver as flight controller. The Makerfire is equipped with a 17500KV 6x15mm Coreless Brush Motor, which is more powerful from most of the well known motors used for Tiny Whoop style aircraft,without encountering considerable oscillations.
The Makerfire features a F3 EVO Brushed flight controller that is fully programmable through Betaflight using the onboard USB port. You can tune all the parameters, PID’s, and rates in the way you want in order to be perfect! The native receiver is a Spektrum DSM, which includes ALL Spektrum transmitter,like DX6/DX8/DX9/DX18 etc. The receive distance is up to 300m.
The Makerfire comes with a 3.7V 200mAh Lipo battery with Pico JST connector. When the battery is fully charged, the Makerfire can fly for about 5 minutes. It will take you about 30 minutes in order to fully charge it again.