ANYCUBIC UV Wash and Cure Station 2.0 is the upgraded version of the first Wash and Cure with a larger build volume, larger printing sizes, and faster printing speed. ANYCUBIC UV Wash and Cure Station 2.0 Compatible with most of the UV / LCD / DLP 3D printers on the market.
ANYCUBIC UV Wash and Cure Station 2.0 added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly. ANYCUBIC Wash and Cure Station 2.0 has Dual functions of cleaning and curing that can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It’s a professional solution to the messy clean-up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs.
The ANYCUBIC UV Wash and Cure Station 2.0 is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series, and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow. There is a propeller in the bottom of the wash cure station; when work, it spins the solution like a little tornado and changes spin direction halfway through the wash; which creates the perfect flow to clean every inch of the print.
2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to the resin. The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays; with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning; which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.
ANYCUBIC UV Wash and Cure Station 2.0 has dual functions of cleaning and curing. It makes it easier to clean and cure the printed model. It is an excellent assistant for UV LCD 3D printers. We can buy it from Banggood at $179.00 in Flash Sale.