The OXVA XLIM PRO 4 upgrades the flagship pod series by pairing an 1800mAh battery and 3A flash charging with Smart Liquid-Level Detection. Engineered to eliminate dry hits while delivering dense vapor through UNITECH 3.0 cartridges, it balances everyday convenience with precise wattage and airflow control.
Build, Design & Display
Constructed from zinc alloy with IML or PU leather panels, the XLIM PRO 4 measures 124 × 27.4 × 17.6mm and weighs roughly 78–89g depending on the finish. Finishes like Flowing Midnight and Black Carbon offer a substantial, ergonomic grip, though the glossy metallic frame picks up fingerprints easily.
The 0.98-inch HD color screen displays wattage, coil resistance, battery percentage, and puff count clearly in direct light. Users can customize the interface with 4 UI themes, 3 vaping animations, and 3 LED lighting effects.
Anti-Burn Tech (ABT) & UNITECH 3.0 Performance
The standout feature is OXVA’s Anti-Burn Tech (ABT). Using Smart Liquid-Level Detection, the chipset monitors e-liquid saturation inside the pod in real time. When e-liquid drops too low, the device immediately cuts firing power and displays a refill prompt on screen—preventing burnt cotton and extending pod lifespan. (Note: ABT requires both the XLIM PRO 4 and an XLIM ABT Cartridge; older XLIM Top Fill and EZ pods work normally without dry-hit protection.)
In daily use, the UNITECH 3.0 pods (included in 0.6Ω and 0.8Ω 3ml top-fill variants) saturate in just 30 seconds after filling.
- 0.6Ω ABT Pod (20–25W): Delivers warm, dense vapor ideal for Restricted Direct-to-Lung (RDL) draws and freebase e-liquids.
- 0.8Ω ABT Pod (12–16W): Produces crisp, concentrated flavor tailored for Mouth-to-Lung (MTL) vaping with nicotine salts.
The side vertical airflow control (AFC) slider transitions smoothly from a tight cigarette-style draw to an airy RDL inhale, though closing it down for strict MTL can introduce slight airflow whistle. Leak resistance is noticeably improved thanks to a 360° sealed base, keeping the pod bay dry across multiple refills.
Battery Life & 3A Flash Charging
Equipped with an 1800mAh internal battery and PULSE output stabilization, the XLIM PRO 4 maintains consistent flavor intensity even as voltage drops. Heavy users averaging 22W will consume roughly 7 to 7.5ml of e-liquid per full charge. Using a compatible 5V/3A USB-C adapter, the device charges from empty to 100% in approximately 40 to 47 minutes, while a quick 10-minute top-up provides several hours of moderate vaping. Activating One-Tap ECO Mode dims screen animations and limits background draw to stretch low battery levels.
How to Use the OXVA XLIM PRO 4
- Fill & Prime: Lift the silicone top-fill plug on the XLIM ABT cartridge, fill up to 3ml, close securely, and wait 30 seconds before your first puff.
- Power & Activation: Press the side button 5 times rapidly to turn the device on or off. Vape using either auto-draw or by holding the fire button.
- Adjust Wattage: Press the button 3 times until the wattage flashes, then tap to cycle between 5W and 30W (Smart VW automatically caps wattage to match your coil).
- Customize UI & ECO Mode: Press 2 times to enter the menu for themes, animations, and lighting effects, or select One-Tap ECO Mode to conserve battery.
- Toggle Anti-Burn Tech: With an ABT pod installed, press the button 8 times consecutively to enable or disable ABT protection.
Specifications Summary
| Feature | Specification |
| Dimensions & Weight | 124 × 27.4 × 17.6mm / ~78–89g |
| Battery & Charging | 1800mAh / USB-C 5V/3A Flash Charging (~40–47 mins) |
| Output Power | 5W–30W (Smart VW & PULSE System) |
| Display | 0.98-inch HD Color Screen (4 Themes, 3 Animations) |
| Pod Capacity & Coils | 3ml (2ml TPD) XLIM ABT UNITECH 3.0 (0.6Ω & 0.8Ω included) |
| Compatibility | All XLIM Series Pods (ABT required for Anti-Burn Tech) |
Read Also: OXVA XLIM Pro 4 vs XLIM Pro 3 Review: Is the New Anti-Burn Upgrade Worth It?









