The 7000mw Desktop Laser Engraver has an overall engraving area of 150mm x 150 mm in the Working area; 160mm x 160mm in GRBL Mode. This desk laser engraving machine can be used with materials such as aluminum(like 7075-T6), plywood, kraft paper, leather, plastic, cardboard, wood, non-woven fabric, bamboo, acrylic,film-coated glass, etc. For Laser cutting, it can cut cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather.
At the same time, 7000mw Desktop Laser Engraver Machine supports NEJE control software and GRBL software, which can not only enjoy the simple portability of NEJE software but also support the operation fun of GRBL open-source software; it supports the dynamic control laser module developed by Neje, which can support PWM power regulation, low light brightness regulation, laser temperature induction protection. 4A load current, capable of delivering powerful output power, 15,000 rpm fan, and exquisite heatsink design, can keep temperature safe control within 60 degrees Celsius, maximizing protection laser life, no matter how high-intensity you use, no matter how you work how long.
The new structural design of the one-arm movement makes it lighter and more portable while ensuring stability. The 7000mw Desktop Laser Engraver machine was in-built with a gyroscope protection device. When the machine is running, the built-in gyroscope will record the working position at the beginning. If there is an accidental touch or the machine is displaced; the machine will automatically stop working to prevent accidents. Professional file processing algorithm, the software can restore your design 1:1 lossless to each pixel. A variety of image algorithms better present the image characteristics of your family or idol.
Also Read: Get Electric Guitar Solid Wood Paulownia Body at €118.99 From TOMTOP
7000mw Desktop Laser Engraver Machine Full-featured that directly execute.BMP, JPG, PNG files, and “NEJE CLOUD” provides thousands of engraving materials and resources to download and keep updating. Standard 450nm 20W laser tube. The Master 20W excels in fast cutting and can cut materials from 3mm to 8mm thickness. 4Pin laser design with temperature sensing and surge protection design can effectively extend the laser life, and the laser interface supports other machines developed by KKmoon.
Getting the driver and software installed was really easy. Download and install directly from the link, the software will automatically connect after opening the software. Provide professionals with the ability to directly parse the works designed by Inkscape and CAD software, directly execute .nc files and .dxf files, and execute them accurately. You can do the complex edits in PS / Inkscape / CAD or similar and just burn with the included program.