Get ANYCUBIC Wash & Cure 2.0 Machine 3D Printer at $88 with Coupon

The ANYCUBIC Wash and Cure Station 2.0 Machine 3D Printer simplifies the handling for people who like to print with resin. With only a few pushes of a button, this machine cannot only wash your prints but also cure them. All this in the same machine. No longer do you have to worry about leaving your prints in a bath of IPA too long or keep track of curing times with the risk of something going wrong. A huge benefit of ANYCUBIC Wash & Cure 2.0 Machine 3D Printer is the fact that it can work with two wavelengths. Both 405nm and 365nm are available, and this covers 99,5% of all resins on the market today. The 360° rotating curing platform makes sure that the curing will be even over the whole print.

The ANYCUBIC UV Wash and Cure Station 2.0 is a great addition to most types of regular resin printers, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series, and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow. There is a propeller at the bottom of the wash cure station; when working, it spins the solution like a little tornado and changes spin direction halfway through the wash; which creates the perfect flow to clean every inch of the print.

Also Read: EMAX Tinyhawk II Review – Racing FPV Drone at €139.49 / $149.99 From TOMTOP

2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to the resin. The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays; with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning; which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.

ANYCUBIC Wash and Cure Station 2.0 has Dual functions of cleaning and curing; that can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It’s a professional solution to the messy clean-up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs. ANYCUBIC UV Wash and Cure Station 2.0 added lens to UV lamp beads; the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so the entire model is cured more thoroughly.

ANYCUBIC Wash and Cure Station 2.0 has dual functions of cleaning and curing. It makes it easier to clean and cure the printed model. It is an excellent assistant for UV LCD 3D printers. We can buy it from TOMTOP with Discount Coupon Code: TFWACU (can be used on 4 warehouses)