If your MacBook or iMac won’t boot up, or is just stuck on the white logo, then don’t panic. This can happen to some and it’s normally an issue that can be solved. So we’ve put together a quick and handy guide to help bring your Mac back to working order.[usb c hub multiport adapter]
- Check The Power
This may seem silly, but you’d be surprised how often this is a problem without you even realising it. If your Mac won’t boot up, then try plugging in it’s lention adapter to the socket. It’s possible your device’s battery is just drained or just faulty.
If it still won’t activate, even when plugged in then check if it’s properly connected and that the cable isn’t damaged. A faulty cable can often be misleading so it’s handy to have a cable organiser to prevent this. Also, check that the charging port is clean and free from dust, which tends to interfere with older chargers. Moreover, unplug any external hardware as this can also be a possible cause.
- Conduct A Power Cycle
If power isn’t the problem, then do this instead. This will essentially cut off all power, which will let you reboot from scratch. So for ten seconds, you need to hold down the power key. For those with iMacs, you can just disconnect the power cable. It’s a common way to essentially reset everything, so it’s applicable to more than just Macs. After this, try turning on your Mac or plugging your iMac back in. This should bring it alive.
- Reboot In Safe Mode
It’s possible that whatever was active on the Mac prior to the problem starting, is the root cause. As such, turning on your device in this mode should help solve the problem. Simply hold down the power and shift buttons until you hear the chime, then proceed on as usual. What this does is conduct a number of diagnostic tests and then boots up your system on an older MacOS, so it essentially just turns on the basic stuff.
Once it’s on, you can then just remove any new applications or hardware that may be causing the issue to begin with.
- Reset The S.M.C
For those unfamiliar, this is what controls a wide array of functions on your Apple computer. It basically handles everything from things like your battery, fans, keyboard, power, etc. By using this method, it alleviates most issues that may be plaguing your Mac. There are several ways to do this and it usually varies, depending on the specific device you own.
iMacs; disconnect it from the socket and give it about 15 sec before you reconnecting it then rebooting your iMac.
If you can remove your Mac’s battery, then simply do so and hold the power button down for roughly five seconds. Afterwards, you can place the battery back and reboot.
All other Mac’s: if you can’t remove it, hold down the ‘Power, Control, Option & Shift’ buttons. Hold them for about ten seconds, you can let go after that and then give it a few extra seconds before rebooting.
- ResetTheNvram
For those unfamiliar with what a Nvram is, it’s basically a unique portion of your system’s memory that keeps all of your important settings. Normally, problems with this component aren’t typically damaging enough to keep the Mac from booting up, but it’s still worth doing a reset. You can do this by holding down the; power, command, option, and p & r keys. Hold them for about twenty seconds, even if your system reboots. Also, even if the chime noise comes on, only let go after you hear it twice.
- Activate TheDiagnosticsTool
If after doing all this, your Mac still won’t reset, then this Apple tool should diagnose the problem and suggest a solution. Before doing this, disconnect any external hardware. So, even if you have connected in a usb 3.0 ethernet adapter for example, unplug it. You can activate the diagnostic tool by pressing the lower and d keys. Once a menu prompt comes up on the screen, you can then proceed with the program as it quickly takes time to assess your Mac’s condition.
Once completed, the results will offer up some solutions to quickly solve the issue and/or show you some support options. If there aren’t any problems, then your hardware probably isn’t what causing the issue.
Conclusion
The benefit of Apple products is that they generally offer fantastic reliability, so you never have to worry about this kind of thing happening too often. However, keep in mind that, they are still not exempt from the occasional problem, every now and then. And while, it’s normally easy to solve them, it’s best to periodically run a diagnostic check to prevent or address such issues before they arise.
Sometimes you may experience issues with your MacBook that may require you to access the task manager in Mac. For example, your MacBook may become unresponsive which may require you to access the task manager for a solution. There are different solutions to an unresponsive Mac, such as checking the power, conducting a power cycle, rebooting your Mac in safe mode, resetting your Mac’s S.M.C, or activating the Diagnostics Tool. Interestingly, you can carry out all these solutions through the task manager in Mac. Yet, if there is something that Mac users struggle with, it’s how to access the task manager in Mac. Learning how to access the task manager in Mac goes beyond such simple solutions making it an important thing to learn to use if you own a Mac. While there’s no direct shortcut to open the Task Manager on Mac, you can use a shortcut (Control-Alt-Delete) to force quit any application that might be causing issues on Mac, like the Mac being unresponsive.