One of the main reasons for the mush taste of the electronic cigarette atomizer is the poor oil conduction. Although for many novice users, the concept of poor oil guide may be difficult to understand, in fact, the reasons for this phenomenon mainly include three aspects: smoke oil, atomization core and operation. As long as you carefully examine these three aspects, you can easily find the reasons for the poor oil guide and take the corresponding solution skills.
First, the problem of poor oil conduction caused by the high VG content of tobacco oil
With the popularity of large smoke devices, high VG smoke oil is becoming more and more popular with players. However, for many finished atomizers and even oil storage atomizers, the viscosity of high-VG smoke oil is high and the fluidity is poor, which makes it difficult to achieve smooth oil conduction when users use it frequently. If you prefer a high VG fume with thick smoke, you can consider using it with a drip oil atomizer or a storage oil atomizer with a large oil hole.
Second, the oil guide caused by the atomization core problem is not smooth
For the finished atomizer, as long as the smoke oil is reasonably matched and the frequency of use is reasonable, the phenomenon of poor oil conduction will almost not occur. For DIY atomizers, the most common reason for poor oil transport is the problem with the arrangement of cotton. When the cotton between the coils of the DIY atomizer is too tight or too much cotton is stuffed into the oil guide hole, it will lead to problems in the transmission of the soot.
Third, the problem of poor oil guide caused by operational reasons
The conduction of the liquid takes a certain amount of time, and when the user uses the electronic cigarette too frequently, the conduction speed of the liquid cannot meet the needs of the user for excessive smoking, which leads to the situation that the oil is not timely. This phenomenon is often mistaken by users for poor oil flow in the atomizer. At present, many oil storage atomizers use the top oil injection structure, but when the internal oil tank pressure is too large, it will lead to poor oil conduction. The specific phenomenon is that when pumping, the smoke oil in the oil tank will surge upward with the pumping. This situation can be handled by opening the top cover for pressure relief.
In fact, the oil is not smooth and the oil is not timely these two problems are easy to confuse. Oil conduction is not timely mainly due to the user’s frequent suction or use of too high output power caused. The poor oil conduction is more due to the lack of fluidity of the smoke oil, the oil guide cotton of the atomization core is too dense, or the oil warehouse pressure is too large. If there is a paste core, under the normal frequency of use, it is easy to find the problem of poor oil guide of the atomizing core.