Laser engravers and cutters are enjoying increasing popularity worldwide, especially in the private sector. The ATOMSTACK A5 M50 Pro Laser Engraver and Cutter is a further development of the ATOMSTACK A5 M50. In the following, we would like to explain what makes this model so special.
Design
The laser engraver and cutter work with a quadruple lens compression spot (quadruple lens compression spot) and has an optical power of 5 to 5.5 watts. The laser focus area is 0.08 x 0.08 mm. The high-density laser can cut up to 20mm thick wood and 15mm black acrylic and more, as well as engrave stainless steel, ceramic, glass, leather, bamboo, plastic, wood, acrylic, and more. The filter panorama glass filters up to 97 percent of the UV light and should not be removed. As it is based on a modular design, the engraving area can be increased from 410 x 400 mm to 410 x 850 mm with an additional extension kit.
Features
The ATOMSTACK A5 M50 Pro uses fixed-focus laser technology to create a laser focal spot that is half the size of other lasers. Limit switches and scales are attached to both the X and Y axes. An aluminum alloy was used as the frame material. The assembly of the device takes about 20 to 30 minutes. The machine can be stopped with the emergency stop button.
Panoramic glass with a flame retardant filter can filter out 97% of ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you don’t need to wear glasses, you can also watch the laser engraving clearly.
Conclusion
Reduce the cost of your glasses and the inconvenience associated with wearing glasses. Glass is fireproof and safer to use. You can buy it now on TOMTOP For Just €286.07 with Free shipping from Germany.