If you’re new to vaping or just getting started with JNR P5 Glassrock 100K Vape, you’ve come to the right place! This sleek and powerful pod system is designed to offer a smooth and satisfying experience, especially for beginners. Whether you’re upgrading from a basic vape or switching from traditional smoking, the JNR P5 Glassrock is a great choice thanks to its simple setup, compact design, and high performance.
In this step-by-step guide, we’ll walk you through everything you need to know to get your JNR P5 Glassrock 100K Vape up and running, so you can start vaping with confidence.
1. Unboxing the JNR P5 Glassrock Vape Kit
Before diving into the setup process, let’s take a look at what comes in the box. The JNR P5 Glassrock 100K Vape pod system includes the following components:
-
JNR P5 Glassrock 100K Pod System Device
-
Two Refillable Pods (Capacity: 2ml)
-
USB Type-C Charging Cable
-
User Manual
-
Replacement Coil (Pre-installed in the pod)
-
Airflow Control Ring
Make sure all items are present before proceeding with the setup. Now let’s get started!
2. Charging Your JNR P5 Glassrock Pod System
The first thing you should do is ensure your JNR P5 Glassrock Vape is fully charged. Although it’s always a good idea to vape when your device is fully charged for optimal performance, the Type-C charging cable ensures quick charging so you can get back to vaping faster.
Charging Steps:
-
Connect the USB Type-C cable to your device and plug it into a power source (e.g., wall adapter or computer).
-
The LED light on the device will indicate charging status:
-
Red Light: Charging
-
Green Light: Fully charged
-
A full charge takes approximately 1-2 hours, depending on the power source.
3. Filling the Refillable Pods
Now that your device is charged, let’s move on to filling the pods. The JNR P5 Glassrock comes with two refillable pods, so you can have one ready to go while the other is in use.
Steps for Filling the Pod:
-
Remove the pod from the device by gently pulling it out of the slot.
-
Locate the rubber stopper on the side of the pod. Carefully pull it open to reveal the juice fill hole.
-
Fill the pod with e-liquid of your choice, making sure to leave a little room at the top to avoid spillage.
-
Ensure you’re using the right nicotine strength that suits your preference.
-
-
Replace the rubber stopper securely to avoid leakage.
-
Insert the filled pod back into the device, ensuring it’s properly aligned.
It’s recommended to let the pod sit for a few minutes before vaping to allow the coil to fully saturate with the e-liquid.
4. Adjusting Airflow (Optional)
One of the key features of the JNR P5 Glassrock 100K is its customizable airflow. You can adjust the airflow for a more tight draw (similar to a cigarette) or a looser, more airy draw depending on your preference.
Airflow Adjustment Steps:
-
Locate the airflow control ring at the base of the pod.
-
Turn the ring left or right to increase or decrease airflow.
-
Wide airflow = cooler vapor, bigger clouds.
-
Restricted airflow = warmer vapor, better flavor.
-
Experiment with the airflow until you find the setting that feels most comfortable for you.
5. Using the JNR P5 Glassrock Vape
Now that your pod system is filled and your airflow is adjusted, it’s time to vape! The JNR P5 Glassrock features draw-activated firing, meaning you don’t need to press any buttons to start vaping. Simply inhale through the mouthpiece, and the device will automatically activate and produce vapor.
Tips for Using Your Vape:
-
Inhale gently: Avoid taking hard draws to prevent leakage or damage to the pod.
-
Don’t overfill the pod: Overfilling can lead to leaks or burning of the coil.
-
Check your e-liquid levels regularly to ensure the coil is not dry.
6. Maintaining Your JNR P5 Glassrock Vape
Proper maintenance will help ensure a long lifespan for your JNR P5 Glassrock pod system. Here are a few tips for keeping your device in good condition:
Regular Cleaning:
-
Clean the contacts: Wipe down the metal contacts on the device and pod with a soft cloth to remove any juice residue.
-
Clean the mouthpiece: Regularly clean the mouthpiece with a cotton swab or cloth to prevent any buildup.
Coil Replacement:
The JNR P5 Glassrock pods are refillable, but the coils inside may wear out over time. When you start noticing a burnt taste or reduced vapor production, it’s time to replace the coil. The device includes a replacement coil in the kit to help you get started.
7. Troubleshooting Tips
If you encounter any issues while using your JNR P5 Glassrock 100K Vape, here are some common troubleshooting tips:
-
No vapor production: Make sure the pod is properly inserted, and that the coil is fully saturated with e-liquid. Also, ensure the battery is charged.
-
Leakage: Ensure the pod is closed tightly, and don’t overfill it. If the coil is damaged, replace it.
-
Poor flavor: Clean the pod and replace the coil if necessary.
8. When to Replace Your Pod or Coil
To maintain the best vaping experience, replace your pods and coils regularly. Pods should be replaced every 1-2 weeks depending on usage, while coils may need to be changed after several refills, or when you experience a burnt taste or lack of flavor.
Conclusion: Enjoy a Seamless Vaping Experience with the JNR P5 Glassrock Vape
Setting up your JNR P5 Glassrock 100K Vape is easy, and with a little practice, you’ll be vaping like a pro. Whether you’re new to vaping or just looking for a portable, high-quality pod system, the JNR P5 Glassrock provides a satisfying experience with simple steps to get you started.
With its powerful features like draw-activated firing, customizable airflow, and long battery life, the JNR P5 Glassrock is a fantastic choice for anyone looking to enjoy smooth, flavorful vapor on the go.