TWO TREES Sapphire Pro, the most preferred 3D printer produced by the Two Trees brand, has been highly preferred due to its affordable price and excellent performance. In case of power cuts, you can continue printing and printing without any problems. Thanks to the easily adjustable table, you can make adjustments so that the 3D Model you will print out is of better quality and precision. Our device, which is very easy to use, can warm up in 5 minutes from the start and is ready for printing. Our device comes disassembled and can be easily installed.
TWO TREES Sapphire Pro CoreXY 3D Printer comes with a modern self-adhesive printing pad made of PEI material. Its well-designed extruder significantly reduces the risk of clogging. The Bowden design of the extruder, in turn, makes it possible to lighten the print head and thereby speed up, stabilize and overall make its movement more efficient. The X and Y axes move along high-quality MGN12 linear guides, so their movement is very precise and quiet. The Z-axis is mounted on 12mm guide rods with LMK12LUU bearings and driven by a T8/2/8 trapezoidal screw.
There should also be significantly less vibration and movement during the printing process. The printing accuracy is ±0.01mm, the Z-axis accuracy is 0.0025mm, the X/Y-axis accuracy is 0.01mm, the nozzle diameter is 0.4mm, and the filament used is the usual 1.75mm. The layer height can be adjusted (by software) to 0.1 to 0.4mm. The consumption in operation is a maximum of 360W. TMC2208 256 silent driver stepper motors were also installed for this purpose. The print area is 235x235x235mm and easily covers the most common prints that you will need in everyday life.
Also Read: Get HONOR Band 6 AMOLED Screen Smart Bracelet at $25.99 From CAFAGO
If it gets bigger, you can also split the 3D models using software and print them individually. Since we’re on the subject of software: here you can again choose whether you want to use Cura; Repetier-Host, or other software. In addition to the auto-level sensor; there is also a filament sensor integrated and also the possibility to resume prints that were interrupted by a power failure. Unlike the conventional printers you are familiar with; the Two Trees Sapphire Pro Core XY has a slightly different structure and also works subtly differently. Here only the extruder moves in the X and Y axes instead of only on the X axis or up on the Z axis. However, the heating bed now moves down for each shift.
TWO TREES Sapphire Pro CoreXY 3D Printer comes with a modern self-adhesive printing pad made of PEI material. Its well-designed extruder significantly reduces the risk of clogging. The Bowden design of the extruder, in turn, makes it possible to lighten the print head and thereby speed up, stabilize and overall make its movement more efficient. The X and Y axes move along high-quality MGN12 linear guides, so their movement is very precise and quiet. The Z-axis is mounted on 12mm guide rods with LMK12LUU bearings and driven by a T8/2/8 trapezoidal screw.
The TWO TREES Sapphire Pro CoreXY 3D Printer kit is probably too complicated for 3D printing beginners. For everyone else who knows how it works and dares to approach a larger construction site; you get a lot of printers and printing areas for little money. You can buy It from CAFAGO at €159.99 with free shipping from Germany Warehouse.