As we all know, vaping core is a very important part of e-cigarette, because a good atomizing core can improve the taste of e-cigarette, but a bad atomizing core can also ruin the taste of e-cigarette! Now on the market, there are two kinds of electronic smoke core, one is ceramic core, one is cotton core! No matter which kind of atomizing core, beyond the service life of the atomizing core, it needs to be replaced, so how to replace the electronic smoke core? How long is the service life of the electronic smoke core?
Classification of atomizing cores
The type of atomizer core also corresponds to the classification of atomizer. Atomizer can be divided into “finished atomizer” and “RBA reconstructable atomizer” two categories. The atomizing core life of different types of atomizers is also different.
A. “Finished Atomizer”, as its name implies, adopts atomizer core uniformly processed by the factory, which can be replaced directly by users after purchase. For example, Dasvape D60 and D80 use finished atomizer core.
Life of atomizing core
Normally, the service life of the finished atomized core should be about 7 days to half a month. However, due to the different frequency and smoke oil used by everyone, the life of atomizing core will be different.
Because everyone’s habits are different, the service life of the atomizing core of RBA is also quite different. Some people like to replace it once a day, or even once a bin of oil, while some people replace it 3-5 days, of course, there are also half a month or even a month to replace it. It is often “shocking” when replacing the atomizing core.
Factors affecting the life of atomizing core
The life of atomizing core is different with the user’s use habit. The same atomizing core, some people may use half a month, and some people can only use three days. So what are the factors that affect the life of atomizing core?
A. Power. Atomizing core has a certain range of tolerable power, if the user set the output power is too high, then the high temperature generated by the coil will be excessive evaporation of smoke oil, the surrounding cotton too late to add smoke oil will burn cotton, produce mush, affect the taste and taste.
B. Tobacco oil. The greatest influence of soot on the life of atomizing core is carbon deposition. Different brands of tobacco oil raw materials and additives are different, will cause the speed of “carbon deposition”. For example, “Malay fume oil” is recognized as “high carbon content” fume oil, so try to use it with RBA atomizer. Even if carbon accumulation is formed quickly, which affects the taste and use, an atomizing core can be remade.
C, incorrect use method. Most finished atomizers are equipped with atomizer cores when they leave the factory. The user had better remove the atomizing core first, and drop a small amount of smoke oil into the cotton around the oil hole and coil to wet the cotton. This step is called “moistening the core”. The idea is to soak the cotton in advance so it can absorb the soot more easily. If the atomizing core is not fully saturated, it is possible to burn the cotton after ignition and absorb the mush in the mouth.
D. High VG tobacco oil. Generally speaking, the higher the VG, the greater the volume of smoke, and the thicker and less liquid the soot. Therefore, the high VG content of soot is often used with large smoke atomizer, such as drip oil atomizer. However, the oil guiding system of some finished oil storage taste atomizers cannot cope with the high VG ratio of soot, which will burn the atomizer core due to the lagging oil guiding speed. Therefore, the PG/VG ratio of soot is also a factor affecting the service life of the atomizer core.
When should the atomizing core be replaced
There is no fixed replacement cycle for atomizing core in actual use, and the replacement cycle can only be judged according to the user’s own experience. You can refer to the following performance to judge:
A. Judging by the change in the taste of the tobacco oil. In the process of use, if the taste of smoke oil becomes worse, mixed with a trace of mush (burning cotton flavor), and smoke oil roar feeling stronger, there is a “spicy voice” feeling, then it is necessary to check whether the atomizing core has been serious carbon accumulation needs to be replaced.
B. Observe the inside of atomizing core. You can remove the oil bin, observe the inside of the atomizing core, see whether there is burning, discoloration and carbon accumulation of cotton around the coil, and decide whether to replace it according to the situation.
Electronic cigarette how to change atomizing core and replacement method
As a new way of smoking, electronic cigarette is being recognized and accepted by more and more people. In the process of using e-cigarettes, the replacement of atomizer core is an essential process of using e-cigarettes. So, how to replace the atomizing core?
1. Open the bottom of the atomizer by turning it counterclockwise
2, and then from the counterclockwise rotation, unscrew the old atomizing core
3. Screw on the new or spare atomization core (turn it clockwise at this time, remember to tighten the atomization core)
4. Finally, rotate the atomizer clockwise and screw back the bottom of the atomizer that has been opened first
Note:
1. Before replacing the atomizer core, please ensure that there is no smoke oil in the atomizer before replacing the core, so as to avoid oil leakage!
2. When screwing on the new atomizing core, remember to tighten it in place, and ensure that it is not too tight, so as not to take it down when replacing the atomizing core next time.
How much resistance does it take for an e-cigarette atomizer not to smell burnt
The core reason for the burnt taste is that the smoke oil on the oil guide cotton evaporates too fast, leading to dry burning of the oil guide cotton. Either reduce the heat or increase the volume of the oil guide. Most finished atomizers cannot change the oil guide volume, so the only way is to reduce the output voltage or output power of the battery rod. The simplest CE4 atomizer, for example, usually has a resistance of about 2.4 ohms, so when the output voltage exceeds 4V, it will smell burnt. Do not know the type of atomizer you use, it is recommended that you use a voltage regulator, gradually adjust the voltage or power, from low to high, test out a best output power.
E-cigarettes are a small piece of technology, so they tend to be a little more difficult to use than the real thing, but they are far more harmful than the real thing, so in order to choose between the real thing and the e-cigarette, the e-cigarette is better! Although the electronic smoke core needs to be replaced, but the service life is several months, so it is not very troublesome!