As e-cigarette technology continues to evolve, there are more e-cigarette brands, and the market for e-cigarettes is growing. Each type of e-cigarette has a different way to use it. Here’s how to use VOOPOO VINCI e-cigarette! VOOPOO VINCI e-cigarette users, beware!
In terms of appearance, VOOPOO VINCI adopts cuboid design, with black as the main color of the whole body and small squares on the side. The overall look is more commercial, which can be seen that the whole design is dominated by men. VOOPOO VINCI printed on the front.
VOOPOO VINCI How to Use e-cigarettes
VOOPOO VINCI Vapers have three buttons on the front and a small visual screen that displays digital displays such as time, mode, and suction record. The top button adopts a circular design, which is more integrated with the overall rectangular design. Short press the circular button 5 times can realize the switch, in addition, short press 3 times can realize the key ignition, automatic ignition and double ignition three modes of switching. At the bottom of the visual screen is a vertical bar button that is simultaneously pressed to access the PUFF screen, where users can see the puff count for the last 14 days and the Puff count for a given day. With the round button, it can unlock, lock, set time and other states. The e-cigarette is made up of a PCTG bomb and a host. The host is named VINCIR and is made of zinc alloy. It has a 1500 mah lithium battery with bright green light above 60%, blue light between 20-60% and red light below 20%.
The charging port uses a Micro-USB port, which can be charged in 5V/1A mode and can be fully charged in about an hour and a half. The airway adopts the dual-core and dual-airway mode, and the built-in GENE.AI chip has the ability of intelligent core burning prevention, and can conduct intelligent detection of different atomizing cores of 0.3Ω and 0.8Ω. Press the power button three times to switch the manual/pneumatic mode, with dual ignition (A &P) mode, manual (P) mode and pneumatic (AUTO) mode. Its size is 104*25.3*25.3mm, holding in the hand belongs to the compact type, easy to carry around.
The suction nozzle is designed in a flat way, similar to a smoker’s filter, in line with ergonomic design.
The magnetic fit between the smoke bomb and VINCIR is adopted. Its capacity is 5.5ml, and the transparent oil bin design enables timely understanding of the remaining amount of smoke oil. Oil filling port. When filling oil, open the silicone plug, inject more than two thirds into the smoke bomb, and let it stand for about 5 minutes before it can be inserted into the body for use. The e-cigarette has four metal contacts on the outside and three spring-like metal contacts in the middle. The body has seven protection functions, such as smoking timeout, nebulizer short circuit, load overcurrent, battery overcharge and power upper limit.
The aforementioned e-cigarette has a two-core, two-airway design, so there are 0.3Ω and 0.8Ω atomizer cores, which provide better resolution of the liquid and nicotine salts. The Mesh core PnP-VM1 uses a conventional fume air duct (recommended) and a small airway, while the Mesh core PnP-R1 uses a nicotine salt small airway. When in use, insert the atomizer into the bottom of the smoke bomb, it can be used. Turn 180° to switch the air passage/small airway.
That’s all for VOOPOO VINCI. Hope it helps!