Huawei P50 Pro uses a dual-ring camera module design. This appearance design can be said to be completely different from the design concept of previous Huawei mobile phones. Moreover, after the Honor Magic3Pro adopts the appearance of a ring lens, many consumers say that the appearance design of Huawei Mate50Pro is covered by the Honor Magic3Pro. So what new design will Huawei Mate50Pro adopt in the future? According to news, Huawei Mate 50 Pro will be upgraded on the design concept of Huawei P50Pro, and the rendering design drawings have also been leaked. The appearance design of Huawei Mate 50 Pro still follows the design concept of double rings. The camera module is composed of two circular parts. However, if you look closely, you will find that the camera module of Huawei Mate50Pro is actually made of The camera module and a circular secondary screen, although it looks very similar to the Huawei P50Pro in appearance, has actually been upgraded on the original basis.
This time Huawei Mate 50 Pro will fully embrace Zeiss. The camera module contains three cameras. All three lenses are certified by Zeiss. They use 100 Megapixel wide-angle lens, 100-megapixel ultra-wide-angle lens, and 64 million pixel telephoto lens. Combination and the size of the other secondary screen is a circular screen with a diameter of 1 inch, which can display some current information, such as time, weather, caller information, etc., when the front screen is off, you can use The secondary screen is used to transfer information, which can save power and increase battery life.
For the design of the screen, Huawei Mate 50 Pro has also been upgraded on the basis of Huawei P50Pro. First, the resolution is upgraded to a 3K retina level. Second, the screen brightness supports up to 1500nit. Finally, the refresh rate of Huawei Mate50Pro is upgraded to 144 Hz. The design of these parameter configurations also makes the display effect of Huawei Mate50Pro very good. This time Huawei Mate50Pro no longer continues the high-curved curved screen design but adopts a straight-faced screen design, which still feels very good.
Huawei Mate50Pro has designed speakers on the top and bottom of the fuselage to form a stereo speaker combination, and the front camera uses a screen punch design. It is said that Huawei Mate50Pro will cooperate with bose, the sound effects will be professionally tuned, and the upper and lower speakers will form a very good stereo sound. And after being combined with earphones and other external amplifiers, Huawei Mate50Pro can also realize different EQ settings according to different brands of earphones or speakers.
The Kirin 9010 is a chip manufactured by Huawei designed using a 3nm process, and mass production is likely to be achieved when Huawei Mate 50 Pro is released in the future. Chips made based on the 3nm process are indeed powerful, but at this time Huawei no longer pursues the performance of the processor, but pursues the power consumption design of the processor, because the performance of the processor has already met the needs of daily use, but the powerful performance is accompanied by What comes is the increase in power consumption, so Kirin 9010 pursues the reduction of power consumption even more in terms of design.
Huawei Mate 50 Pro will also have a great upgrade in terms of charging speed and battery capacity inside the fuselage. The battery capacity of Huawei Mate50Pro will exceed 6000 mAh, and the wired fast charging speed will reach 100W, and the wireless fast charging speed will reach 80W. The body material of Huawei Mate50Pro will also have a ceramic version, the running memory supports up to 12GB, and the storage specification supports up to 1TB.
No matter how you look at it, Huawei Mate 50 Pro is a good mobile phone with advanced design concepts, especially with the addition of a 1-inch secondary screen and two 100-megapixel camera lenses. These configurations are all fascinating. Once it is released, consumers It will definitely be generally applauded.