The MX Mesh Coils are reserved for the Maxus DTL cartridge – and therefore the Maxus Max kit – by Freemax. They allow very cloudily vaping direct inhalation (DL), or even restrictive direct inhalation (RDL). Qualitatively, they promise a long and tasty vape.
When you receive the package, you will see MX2 0.2ohm mesh coil is already installed. It works in the 60 to the 90-watt range but is best used at 80 watts. And a 0.15 ohm MX1 mesh coil is also included with a range of 50 to 80 watts but is recommended at 70 watts. There are 4 additional reels. The MX Mesh Coils are made from mesh, a grid-like resistive material. This makes it possible to considerably increase and homogenize the heating surface for excellent restitution of flavors.
The Dual coils of the Mesh type offer large heating surfaces and a mesh in Kanthal surrounded by organic cotton, the supply of e-liquid is done by large vertical windows located all around the outer envelope. Here the classic resistive wire is replaced by a thin mesh plate providing a larger heating surface. These specific characteristics greatly improve flavor rendering and vapor production. The liquid flow generally works very well – air bubbles rise immediately after each puff.
The coils of the MX Mesh Coil are nearly identical to the previous M Pro Mesh coils, with a single/double/triple structure, except for the new coils, which use a pluggable design for less messy coil changes and an effortless process.
- MX1 Mesh Coil 0.15ohm: you will use them from 50 to 80 watts (Best 70W)
- MX2 Mesh Coil 0.2ohm: they will require a setting between 60 and 90 watts (Best 80W)
Approximately every 2 to 3 weeks, when you feel a burnt taste or your vapor becomes increasingly scarce, you will need to change your MX Mesh Coil resistance to Freemax.
Verdict
As we explained MX Mesh Coil For M Pro Mesh are 2 different variants with different watts, so if you want to buy or read more about MX Mesh Coil you can check out the official website.