UMIDIGI F1 Play (EU) V1.0_20190425 ROM – SPFT + OTA release


Here we will guide on how to install stock ROM on Umidigi F1 Play. The guide is simple and easy to follow. These days there are great numbers of smartphone enthusiast interested in learning the technical aspects of smartphones. So, they keep tweaking the phone in terms of hardware and software. However, sometimes, unfortunately, they end up bricking their device. Now, as we know in a bricking scenario, the phone won’t start and becomes a paperweight. This can happen with any smartphone. Some of our readers had this issue on their Umidigi F1 Play. So, in this post, we will guide you to install Stock ROM on Umidigi F1 Play. We have put up the download link for the corresponding ROM along with the installation guide. So, check it out.

Importance of Stock Firmware

Stock ROM is always an important part of smartphones. When you move to stock ROM, you can fix up a lot of problems. We have listed the sam below.

  • With the help of stock ROM, You can unbrick your Umidigi F1 Play.
  • Solve the boot loop issue on Umidigi F1 Play.
  • You can bypass system Lock and Screen Lock
  • Removes any possible case of spyware or Adware in your devices.
  • To fix any bugs on your Umidigi F1 Play.

Firmware Details:

  • Device Supported: Umidigi F1 Play
  • Tool Supported: SP Flash tool
  • Processor: MediaTek SoC
  • Android OS: 9.0 Pie
  • File: Software Update

How to Install Stock ROM on Umidigi F1 Play

Before doing anything, we need to have the ROM file for the designated device ie Umidigi F1 Play. Here is the download link for the same.

Download Stock ROM File

Firmware Europe region: Download
Firmware other regions: Download
Update file for manual OTA update:

It can update version 20190409 and 10190412 only

Installation Guide

Before beginning with the installation remember a few pointers we have mentioned below.


  • This ROM is exclusively for the Umidigi F1 Play. Don’t use it on other devices.
  • Charge your phone completely before installing the ROM.
  • A Windows PC/Laptop
  • Download and install Umidigi USB drivers on your Windows PC.
  • You can only install this ROM using SP Flash Tool. So, download the SP Flash Tool.
  • You will also require VCOM Drivers in this installation process. Download VCOM Drivers and install it.

So, that’s it, guys. Now you know how to install stock ROM on Umidigi F1 Play. We hope this tutorial was helpful to you. In case you have any queries do let us know in the comments.

Igeekphone will not be responsible for any hardware or software issue happening to your phone upon installing this firmware or following this guide. Perform this installation at your own risk..!


Leave A Reply