UMIDIGI S2 V1.0_20170928 ROM Download and Install Here


UMIDIGI has released its latest phone, UMIDIGI S2 which is a 6 inch 2.5D Sharp bezel-less screen with 1440*720 Pixel, powered by Helio P20 MTK6757 Octa core 2.3GHz processor,  RAM 4GB ROM 64GB internal storage, it has Sony IMX258 13MP+5MP Dual rear camera and 5MP front camera, built in 5,100mAh battery. It is your best time to enjoy it now, And we also have got UMIDIGI S2 ROM for your download and install below.

This is the SP Flash Tool release of the V1.0_20170928 (Android 6.0.1) system software for UMIDIGI S2

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMIDIGI S2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you’ve bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.
  • Improved Fingerprint scanner unlock speed
  • Redesigned Camera UI
  • Added ‘Battery save mode’ auto turns on when reaching low battery
SP Flash Tool
Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)
ROM: >>>>> 20170928_g20v57c2k_kw_s81.rar <<<<<
Extract the .rar file before use. The scatter file (MT6757_Android_scatter.txt) is inside the extracted folder, together with the other components
VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe
Here’s an optional solution to start the flashing process on your UMIDIGI S2 if the standard method doesn’t work.
It’s especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI S2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

Leave A Reply