When using electronic cigarettes, if the atomizer produces a mush taste, the reason is that the oil guide of the atomizer is not smooth. The statement that the oil is not smooth may be difficult for many novice users to understand, but in fact, the reasons for this phenomenon are nothing more than smoke oil, atomization core and the use of three aspects of operation, as long as the three aspects of careful search, it is easy to find the reasons for the oil is not smooth.
First, the problem of poor oil conduction caused by the high VG content of tobacco oil
With the prosperity of large smoke equipment, high VG smoke oil is more and more sought after by players. However, for many finished atomizers or even oil storage atomizers, the viscosity of high-VG smoke oil is high and the fluidity is poor, and it is difficult to achieve smooth oil conduction when users use it frequently. If you like the thick smoke of high VG smoke oil, you can consider using it with a drip oil atomizer or a storage oil atomizer with a large oil opening.
Second, the oil conduction caused by the problem of atomization core is not smooth
For the finished atomizer, as long as the reasonable mixture and frequency of use are guaranteed, there will be almost no poor oil conduction. For DIY atomizers, the most likely reason for poor oil conduction is that there is a problem with the arrangement of cotton. When the cotton between the coils of the DIY atomizer is too tight or the oil guide hole is stuffed with too much cotton, it will cause problems in the transmission of the soot.
Third, the problem of poor oil conduction caused by operational reasons
The conduction of the liquid also takes a certain time, when the user uses the electronic cigarette too frequently, the conduction speed of the liquid cannot meet the user’s excessive smoking, and the oil is not timely, which is often mistaken by the user for the oil is not smooth. At present, many oil storage atomizers use the top oil injection structure, but when the internal bin pressure is too large, there will be poor oil conduction, the specific phenomenon is that the smoke oil in the oil bin will surge upward with the suction, this time can be solved by opening the top cover pressure relief.
In fact, the oil is not smooth and the oil is not timely two problems are easy to confuse, the oil is not timely is more due to the user’s frequent suction or the use of too high output power caused by. The oil is not smooth is more due to the lack of fluidity of the smoke oil and atomization core oil guide cotton is too dense and the oil tank pressure is too large caused, if the case of paste core, in the case of ensuring the normal frequency of use can easily find the problem of atomization core oil guide is not smooth.