Lost Vape Centaurus M100 takes a different approach to the typical high-power box mod. Rather than adding a large screen and a long list of controls, it focuses on a compact single-battery platform, a physical control dial, and straightforward power adjustment.
Paired with the Centaurus Sub Ohm V2 Tank, the kit is aimed at direct-to-lung users who want the flexibility of a 100W mod without moving to a dual-battery setup. The combination also gives the kit a practical advantage: the mod remains relatively simple to operate while the tank provides several UB MAX coil options for different power levels.
A 100W Mod That Keeps the Interface Simple
At the heart of the Centaurus M100 is Lost Vape’s Quest 2.0 platform. The mod supports a 5W to 100W output range and accepts a single 18650 battery, which is sold separately. The official manual lists a 0.1Ω–3.0Ω supported resistance range, along with USB-C charging at 5V/2A.
The interesting part is not simply the 100W ceiling. It is how Lost Vape controls that power.
Instead of relying on several small buttons, the M100 uses a 3-in-1 jog-dial interface combined with a sliding on/off switch. The rotating vape mod controls handles wattage adjustment, while the physical switch provides a quick way to turn the device on or off. A 0.96-inch TFT screen provides the basic information needed while vaping, including wattage, resistance, voltage, puff time and puff count.
That makes the M100 particularly interesting for users who prefer tactile controls over navigating through complicated menus.
Why the Single 18650 Configuration Matters
A single 18650 battery naturally puts a limit on how long the M100 can operate compared with larger dual-battery mods. However, it also helps explain the device’s compact format.
The battery is external rather than built in, so users can carry a spare compatible cell instead of waiting for the internal battery to recharge. The battery itself is not included with the kit.
The M100 also supports USB-C charging at 5V/2A. For users who already own an appropriate external battery charger, however, removable-cell charging provides another option.
As with any mod using a replaceable lithium-ion cell, battery condition, correct polarity and appropriate battery handling are important. Lost Vape’s documentation specifically provides battery safety guidance and recommends following the manufacturer’s operating instructions.
The Centaurus Sub Ohm V2 Is Designed Around the M100’s 100W Range
The second half of the kit is arguably just as important as the mod.
The Centaurus Sub Ohm V2 Tank has a 5ml sub-ohm tanks capacity and uses a glass-and-stainless-steel construction. Lost Vape lists compatibility with UB MAX coils, including 0.15Ω, 0.20Ω and 0.30Ω options.
The tank uses a top-fill system and top airflow. This arrangement keeps both the filling port and airflow control toward the upper section of the tank rather than placing the airflow intake underneath the coil. Lost Vape describes the V2 as having a safety-oriented top-fill design, top airflow control and leak-resistant construction.
The result is a tank that fits naturally with the M100’s intended use: relatively high-power direct-to-lung vaping without requiring an especially complicated setup.
Two Included Coils Give the Kit Two Different Starting Points
The included coil selection makes more sense when viewed through power requirements.
The kit commonly includes a 0.15Ω UB MAX X1 coil and a 0.30Ω UB MAX X3 coil. Retail specifications place the 0.15Ω version around the higher end of the M100’s output range, while the 0.30Ω option is intended for a lower power range.
That difference gives users a straightforward way to experiment with the device without immediately buying additional coil types.
The 0.15Ω coil is the more power-oriented option, while the 0.30Ω coil allows the M100 to operate at a more moderate setting. The important point is that coil resistance should not be treated as a standalone performance rating; the manufacturer’s recommended wattage range should always be followed.
Lost Vape’s tank documentation also advises allowing a newly installed coil to saturate after filling before use.
Top Airflow Changes the Tank’s Character
The Centaurus Sub Ohm V2 uses adjustable top airflow rather than a conventional bottom-airflow layout. Lost Vape lists the tank’s top airflow and leak-resistant construction among its main features.
For everyday use, this design has a practical benefit: the airflow intake is positioned away from the bottom of the tank.
The airflow can also be adjusted to change the draw. A more open setting is better suited to users looking for a loose direct-to-lung experience, while restricting the airflow can produce a denser and more controlled draw.
This makes the tank more adaptable than a fixed-airflow atomizer, particularly when switching between the included coil options.
A Compact Setup Without Chasing Maximum Wattage
One of the more interesting aspects of the Centaurus M100 is that 100W is not treated as the entire selling point.
Many modern box mods compete through increasingly high power ratings. The M100 instead combines its 100W maximum with a single-cell battery, a relatively compact chassis and a simplified interface. The official manual lists the device at roughly 92.7 × 38 × 26mm and about 100g before the battery is installed.
That creates a different proposition.
The kit is not designed to replace a large dual-18650 or dual-21700 setup for users who regularly operate at extremely high power. Instead, it offers a middle ground: enough output for the included sub-ohm tank while keeping the mod smaller and easier to manage.
Who Is the Centaurus M100 Kit For?
The Centaurus M100 makes the most sense for users who already know they want a single-battery direct-to-lung setup.
It is particularly suited to people who value:
- A physical dial rather than a multi-button interface
- Up to 100W of adjustable output
- A removable 18650 battery
- USB-C charging
- A 5ml sub-ohm tank
- Adjustable top airflow
- Compatibility with UB MAX coils
- A relatively compact mod-and-tank combination
It is less compelling for someone looking for a tiny pod system, an integrated battery device, or a high-power dual-cell platform.
What Makes the Centaurus M100 Worth Considering?
The strongest argument for the Centaurus M100 is its balance.
The device does not attempt to compete by offering the highest wattage or the biggest screen. Instead, it combines a single 18650 power source, 100W maximum output and a physical jog-dial interface with a sub-ohm tank that can operate across several coil configurations.
The Centaurus Sub Ohm V2 also gives the package a more practical foundation than the mod alone. Its 5ml capacity, top filling, adjustable top airflow and UB MAX coil compatibility make it a natural match for the M100’s power range.
For users who want a straightforward mod rather than a device overloaded with controls, that combination may be more important than chasing headline specifications.
Final Take
The Lost Vape Centaurus M100 with Centaurus Sub Ohm V2 Tank is best understood as a compact 100W setup built around usability rather than specification overload.
Its single 18650 battery keeps the format manageable, while the Quest 2.0 platform provides adjustable output up to 100W. The jog-dial interface gives the mod a distinctive control method, and the 0.96-inch TFT display covers the essential information without becoming the center of the experience.
The accompanying Centaurus Sub Ohm V2 completes the package with a 5ml tank, top filling, top airflow and UB MAX coil compatibility.
Rather than being a device aimed at everyone, the Centaurus M100 is more interesting as a single-battery vape mods. For the right user, its combination of manageable size, tactile controls and adjustable power may be more useful than a much larger mod with a longer specification sheet.
Note: Battery and e-liquid products should be used only by adults who are legally permitted to purchase and use them. Follow the manufacturer’s instructions and applicable local regulations.