MOTOROLA Moto X40 Pro has been approved by TENAA, Today, OnLeaks revealed more details of the phone’s design, which features a curved screen and three rear cameras.
Moto X40 Pro has a square camera module compared to previous Moto X/Edge models, but the lens and LED flash are arranged differently. At the bottom of the rear panel is the Motorola Logo.
On the front, Moto X40 Pro features a 6.67-inch curved perforated display with Full HD+ resolution, a 165Hz refresh rate and possible HDR10 + certification. On the right side of the body are the power and volume buttons, and the USB Type-C port is between the main speaker grille and the microphone. There may also be secondary speakers or microphones on the top edge.
Moto X40 Pro has a body size of 161.3 x 73.9 x 8.6mm, and the camera module bulge is 10.8mm thick, Igeekphone has learned. Moto X40 Pro 5G will likely have a glass back and perhaps a metal midframe.
From the specs, Moto X40 Pro will be powered by the Snapdragon 8 Gen 2 chip. The rear camera module will have a 50-megapixel main camera, a 50-megapixel ultra-wide Angle camera and a 12-megapixel telephoto camera. It is also expected to use a 60-megapixel front-facing camera for selfies and video calls.
Moto X40 Pro will also support an IP68 water and dust rating, with a built-in 5000mAh battery and 68W fast charging. It is pre-installed to run MyUI 5.0 based on Android 13.