Huawei Mate 50 Pro Rendering: 1.6-inch Back Screen, Snapdragon 898

0

Recently, news from Huawei made headlines again. Some news indicated that the Huawei Mate50 series is still under development. In addition, it was revealed that the Huawei Mate50 series will support new low-orbit satellite communications. Judging from various information, the Huawei Mate50 series is still under development, and the release of Huawei P50 Pro has given many pollen enough confidence that Huawei Mate50Pro will be released as scheduled in the future. Foreign media produced a set of rendering design drawings of Huawei Mate 50 Pro based on relevant information, which is extremely subversive in appearance.

The design concept of Huawei Mate50Pro this time can be said to completely abandon the previous Huawei mobile phone style, and instead adopt an appearance with the design flavor of Xiaomi 11Ultra. Huawei Mate50Pro has a camera module and a back screen on the back of the fuselage. This back screen is 1.6 inches in size and is completely separated from the camera module. In addition, the lens design in the camera module of Huawei Mate50Pro has also completely changed.

The camera module of the Huawei Mate 50 Pro does not carry too many cameras. The rectangular camera module contains three lenses, one of which is a periscope telephoto lens, an ultra-wide-angle lens, and the main camera. The main camera of Huawei Mate50Pro has been upgraded from 50 Megapixels to 200 Megapixels, the ultra-wide-angle lens has 16 Megapixels, and the periscope telephoto lens has 64 Megapixels. Although there are only three lenses, the camera capability of Huawei Mate50Pro is still very powerful, because these three lenses are enough to use.

Huawei Mate 50 Pro chose a full-screen design on the front screen design, and at the same time gave up the front camera solution with screen openings. For this complete screen, Huawei Mate50Pro uses 4K retina resolution with a refresh rate of 144 Hz, supports HDR10+ and Dolby certification, and the display effect is beyond doubt. For fingerprint recognition and unlocking under the screen, Huawei Mate50Pro will expand the recognition area and will not be limited to such a small area for fingerprint recognition and unlocking in the future.

The solution of the Snapdragon 888 4G processor on the Huawei P50 Pro has made a very good model for the Huawei Mate50Pro. The follow-up Huawei Mate50Pro can also fully refer to this solution of the Huawei P50Pro. With the exposure of the Snapdragon 895 processor running points, it is very likely that the Huawei Mate50Pro will be equipped with the Snapdragon 895 4G ​​processor in the future, and there will be a 12GB+1TB Emperor version on sale at the same time.

After the graphene battery technology is fully upgraded, the battery life of Huawei Mate50Pro has been improved significantly. The body battery of Huawei Mate 50 Pro will be upgraded to 5800 mAh, the wired charging speed will be increased to 100W, the wireless charging specification will reach 67W, and it will also support 25W reverse wireless charging. In terms of battery charging specifications, Huawei Mate50Pro will still be at the level of the first echelon.

Read Also: Huawei Mate 50 Pro Rendering: Integrated Surround Screen, 14-Nanometer Kirin Cores

Although Huawei Mate 50 Pro does not support 5G networks, Huawei Mate50Pro supports low-orbit satellite communications and is connected to Beidou satellites. If there is no 4G signal, Huawei Mate50Pro can send emergency information through low-orbit satellites. There is also news that this technology will be equipped with iPhone13. As for the communication technology between Huawei Mate50Pro and iPhone13 on low-orbit satellites, which is more powerful, let us wait and see.

Do not forget to follow us on our Facebook group and page to keep you always aware of the latest advances, News, Updates, review, and giveaway on smartphones, tablets, gadgets, and more from the technology world of the future.

Share.

Leave A Reply