The Geeetech A10M 3D Printer is one of the few models that is equipped with two extruders as standard. This makes it possible to use two filaments at the same time, for example, to create necessary support structures for overhangs. A two-color print is also possible.
With a print area of 220 x 220 x 260mm, the Geeetech A10M provides an excellent build platform and leaves full visibility to the details of the print in progress. The Geeetech A10M does not lack a non-touchscreen, which uses a wheel to select the most appropriate configuration at all times. The size of the engraving area reaches dimensions of 220 x 220 x 260 mm and uses a hot base during printing.
This 3D printer supports most printing materials, such as PLA, ABS, or HIPS. The thickness of the layers of this model is between 0.1 and 0.4 mm, which guarantees good finishes. The main difference of the Geeetech A10M with respect to the A10 is that the first is presented with a double extruder, which will significantly increase printing capabilities and possibilities. Using two rolls of filament it will allow us to combine different materials and colors. Considering the price of both, the Geeetech A10M is worth going for.
The Modularised Design of A10M provides you an easier assembly experience. A10M comes almost fully assembled and you just need to fasten several screws before printing your first 3D printing. Geeetech A10M, coming with a Dual extruder module and a 2-in-1-out hotend, provides you a printer that has the capability to print 4 types of printings with different color combinations, namely, single color, dual color, graded color, and mixed color. A10M will greatly enrich your 3D printing life. A filament detector kills the pain caused by a filament outage or fracture. The detecting system would alert you to change filament in case the printer would run in the air or the spool is empty. This add-on gadget would avoid bootless printing as well as enhancing your printing satisfaction.
The Break-resuming function provides A10M to save real-time printing status and resume the printing job exactly at the same place where it has been stopped. This function totally drives away the hassle of repetitive and time-time consuming printing jobs caused by unexpected power outages. Totally get you out of worries about printing large-size 3D models. Geeetech A10M extruder motor uses a gear train of 3:1 speed ratio, amplifying input torque and improving your printing experience. The building platform has the features of High Adhesion and Even Heating. The hotbed heats evenly and can rapidly reach the target temperature. Because of the high adhesion coating on the building plate, it is easy to take down your printings when the hotbed cools off.
Geeetech A10M comes with Open Source GT2560 V3.0 control board; which provides limitless space for you to modify the firmware at your will. An active 3D printing community will also come into being with our concerted efforts. The mainboard of A10M is professionally coded to support the auto-leveling function. All you need is to connect the leveling sensor with it. The whole operation process is effort-saving and would greatly enhance the adhesion of the first layer.
Geeetech A10M 3D Printer, adopting an open source GT2560 control board, delivers mix-color objects and greatly enriches your 3D printing life. Keeping the good performance of its predecessor A10; it aims to provide users with quality printouts and a satisfactory printing experience. We can buy it from Gearbest at $499 in Flash Sale and ship it from the CZ warehouse.