Huawei P50 Pro Concept Appeared: Dual-Screen Sliding Body, 64 Megapixels Three Cameras


Foreign media have great expectations. Foreign media released a set of concept renderings about Huawei P50Pro. In this set of concept renderings, Huawei P50 Pro uses a sliding body design, while an additional display screen is designed on the back of the phone.     The front screen part of Huawei P50Pro uses a complete one-screen design. At the same time, the screen of Huawei P50Pro does not design the bangs screen and face recognition module. Because the screen is complete, there is no screen punching and the appearance of the notch screen. Why Huawei P50Pro does not use the design of screen punching and bangs screen, personally think that because of the sliding body design used by Huawei P50Pro, after the screen slides out because it is very thin, it can no longer include components such as front camera and face recognition module.

After the screen part of the Huawei P50Pro slides out, you can see that the fuselage is also covered with a layer of screen, but although this layer of a screen can also be touched, the screen can only display the operation buttons, but not other The display of content. This design can reduce the design cost of Huawei P50Pro, and the internal screen also uses a display design, which is actually not significant, and the main role of the internal screen is to control it.

As for the fuselage design, the design of Huawei P50Pro should be eye-opening. Huawei P50Pro has designed a display screen with a comparative size in the middle of the fuselage. This display screen also integrates the functions of some lens modules. This also explains why Huawei P50Pro does not use the design of the front camera and face recognition module because the display on the back of the phone can be used as a selfie.

In addition to the normal display function, the display screen of this part of the Huawei P50Pro fuselage can also be touched, which is no different from the front screen. The number of Huawei P50Pro’s rear cameras has decreased, which may make it difficult for many pollen to accept for a while, but the parameters of the Huawei P50Pro’s three rear cameras are still very high, using 64MP+ 50MP+ 4000 MP combinations.

The body design of the Huawei P50 Pro, especially the hardware parameters inside the body, is said to be equipped with the Kirin 1020 processor that is consistent with the Huawei Mate40. At the same time, although the Huawei P50Pro is designed with a sliding screen, the body is still equipped with The technology of two-way wireless charging. In addition, because Huawei P50Pro adopts a very special design method of side sliding, so it will eventually be equipped with scary technology, which is also worth looking forward to.

Read Also: Huawei P30 Pro vs Huawei P40 Pro Camera Comparison: Need To Be Upgraded?

If Huawei P50 Pro is really released according to the design in the concept rendering, it will be Huawei’s first mobile phone with sliding screen design, and if Huawei P50Pro can really be released according to the design in the concept rendering, Will you support and buy it in the first place?


Leave A Reply