The laser is a rather incredible technology if you think about the fields of use that it can have. For example, did you know that there is a car like this Ortur Laser Master 2 designed for DIY and DIY lovers? On the false line of 3D printers, it is a machine that allows anyone with a certain amount of manual skills to carry out work of laser engraving of a certain level.
- The Laser Master 2 – 7W is good at picture engraving.
- The Laser Master 2 – 15W is the most cost-effective, available for both engraving and cutting.
- The Laser Master 2 – 20W is a higher power and supports faster engraving and cutting.
The Ortur Laser Master 2 has an engraving area of １１ x ２６ cm (９x５inches), allowing you to work on fairly large surfaces. Everything is controlled by the 32-bit motherboard with STM32 MCU chipset, capable of operating the laser with a power of S0-S1000, at a speed of approximately 3000 mm / min. The engraving is done by default with an accuracy of 300 pixels per inch, approximately 0.81 um, thus being able to obtain accurate details.
Ortur Laser Master 2 firmware, smarter, faster, higher precision, and easier to use. Specialized Motherboard with 32Bits MCU. It could preprocess 32 instructions, support a baud rate as high as 921600, more powerful! Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S). Use LaserGRBL or LightBurn (It’s the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux. Laser power range could be S0 – S1000, compared to 8bits desktop laser engravers, which only has S0 – S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to “draw” a picture on paper, that the 8bits high power laser engravers could not do.
The structure can be assembled in just 20 minutes and is made with an aluminum profile; with synchronized axes that prevent instability. There is also a system of 3-level protection; an accelerometer that stops operations if it detects a movement of the structure and sensors; that turn off the laser if the USB cable is disconnected or remains stationary for too many seconds. The supported software is the main ones; including LaserGRBL and LightBurn, in addition to the NC, DXF, BMP, JPG, and PNG image formats. The materials that can be engraved with the Ortur Laser Master 2 are manifold: plywood, solid wood, cardboard, Kraft paper, leather, plastic, coated glass, non-woven fabric, and bamboo.
This is Ortur’s second-generation Laster Master Series Laser Engraving Machine. As its name suggests, The new ORTUR Laster Master 2 is a laser engraver and comes with a laser (7W or 15W) at the factory. It can also be cut and engraved and can be “carved” with limited use. We can buy it from Gearbest at the lowest price:
- The Laser Master 2 – 7W at $195.99
- The Laser Master 2 – 15W at $229.99
- The Laser Master 2 – 20W at $259.99