Artillery Sidewinder X1 Review – 3D Printer High Precision DIY Kit at €265.99 From TOMTOP

0

The Artillery Sidewinder X1 offers a lot of great features, a large build space – and all of this at a very competitive price. As a result, the printer has become one of the most popular 3D printers on the market. Easy to install, just install the gantry, ribbon cable, and filament holder, and the installation can be completed within 2 minutes.

Design

The Artillery Sidewinder has a very large build space of 300 x 300 x 400 mm. This also gives you enough space for larger projects. With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.

Unlike a lot of DIY 3D printers on the market, this printer is built using all metal parts. The use of all metal parts ensures the printer frame is very stable and rigid which translates to better accuracy of printing. The touch screen control panel is a nice touch (no pun intended). The color TFT Touch panel allows control of the 3D printer for performing different functions including the selection of objects to print from an SD memory card. A practical suggestion is to buy a micro-SD card and adapter then you can use a second adaptor on your computer to load files into the micro-SD card and transfer the card to the 3D printer to allow printing without tying up your computer for printing.

Also Read: Get Homgeek 8 Pieces Knife Set For Kitchen at €36.54 From TOMTOP

Features

The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder; Artillery Sidewinder X1 makes high-quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled; which makes installation easy as can be. The printer has a direct drive extruder and a fast heating AC heat bed with built-in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass-smooth-headed surface, it makes all types of filaments can be easily stick on.

There are 3 inductive sensor end stop separately set on the XYZ axis while those non-touch; high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System; Artillery Sidewinder X1 greatly increases its printing stability, also, the built-in branded power supply ensures stable and sufficient power. Spend more time making without having to manually adjust the print bed. Have you ever tripped over the power cord and lost a long hours’ print? SW-X1 will save you from the loss of power. When it recovers from a power failure, the machine will continue to print. Also, it will automatically pause your 3D print and notifies you when you’ve run out of filament, saving you time and money.

Conclusion

Artillery Sidewinder X1 3D Printer is a host to a lot of features that you would hardly imagine a small budget 3D printer can have. The overall experience with this printer is something you would love; it doesn’t matter whether you are a beginner or an experienced user. We can buy it from TOMTOP at €265.99 in Flash sale.

Share.

Leave A Reply