- Innokin EZ Tube Zenith Minimal Kit: Hands On Review
- Innokin Innobar CLK Disposable Vape: Hands On Review
- Voopoo Doric E Kit Elegant and Fashionable: Hands On Review
- Doogee T30 Ultra Tablet 32GB 256GB: Hands On Review
- Maximizing Profits in Bitcoin: Advanced Trading Techniques and Strategies
- Chuwi Corebook X i5-1235U Laptop Hands-on Review: is it Worthy?
- Blackview Tab 18 Review: Should This Be Your Next Tablet?
- UleFone Power Armor 18T Review: A Rugged Powerhouse
QIDI TECH X-Max 3 3D Printer
- QIDI TECH X-Max 3 3D Printer $ 1099
QIDI TECH X-Max 3 3D Printer Main Features
QIDI Tech X-Max 3 3D printer is based on Klipper, capable of printing at a maximum speed of 600mm/s with 20000mm/s² printing acceleration and 35mm³/s extruder flow. Apart from the Klipper firmware, the printer also features a high-speed extruder and a CoreXY structure, making it, therefore, the best high-speed FDM printer of the industrial-grade lineup.
- High-speed industrial-grade FDM machine
- Print speed up to 600 mm/s
- Heated build chamber
- High-speed extruder with a max temperature of 350 °C
- Automatic bed leveling
- Faster Speed 600mm/s
- 325*325*315 mm
- High-Flow 35mm³/s
- Acceleration: 20000mm/s²
QIDI TECH X-Max 3 3D printer comes with:
- Two high-temp hotends
- Dryer box
- Spool of filament
- All the necessary tools
New All-metal Frame
The all-metal frame is ultra-stable, reinforced with metal crossbeams at the bottom, and resistant to deformation.
High-grade Hardness Steel Linear Hollow Optical Axis
Improved surface straightness, and a 60% lower error deflection. Highly durable and has no need for frequent maintenance.
With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion Inertia and improve the motion speed, offering a low-noise printing experience.
High-Speed Extruder with Cooling System
The extruder with a 9.5:1 transmission ratio is steadier, stronger, and faster. The new cooling system can reduce the risk of clogs and ensure smooth extrusion.
Two Sets of Hot End
Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable. Hardened steel nozzle for abrasive materials, and long-term usage. While both have a max print temp of 350 Celsius.
Temperature Controlled Chamber and Drying Box
With an independent heating device that has a maximum temp of 65 Celsius, QIDI X-Max 3 3D printer can high-efficiency print PET-CF, PAHT-CF, etc. It also has a chamber circulation fan with an activated carbon air filter.
No Layer Separation
The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensures that the part is built uniformly without the generation of internal stresses.
Klipper adaptive meshing and purging, fast ensure flawless first layer for every 3D print.
Flexible HF Board
The double-sided flexible magnetic HF plate has excellent adhesion, no warping trouble, and is easy to remove the prints.
Excellent User Experience
The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started. It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.
QIDI Tech X-MAX 3 – Designed for Industrial Grade 3D Printing
QIDI Tech X-MAX Plus 3， a high-speed upgrade of the X-MAX model with a larger build volume of 325*325*315mm and a number of improvements aimed at high performance and industrial-grade print quality. Like the X-MAX, the X-MAX 3 comes pre-assembled and ready to work within 10 minutes after unboxing. The machine is fully enclosed and boasts an actively heated build chamber with an independent heater and a maximum temperature of 65 °C, which ensures reliable printing with high-performance thermoplastics. The chamber is equipped with a circulation fan with an active carbon air filter for better printing results and a safe environment.
Based on the CoreXY kinematics and equipped with Trinamic TMC2209 silent stepper drivers, the QIDI X-MAX 3 prints at a lightning-fast speed of 600 mm/s and acceleration of 20000 mm/s² yet works quietly. As an added bonus, the resonance compensation function allows for reducing the impact of vibrations, ensuring high print quality without visible artifacts. The use of carbon rods on the X-axis and a more lightweight extruder with a 9.5:1 gear ratio reduces the weight of the whole structure making for smoother and faster movements. The X-MAX 3 features automatic 16-point bed leveling with a BLTouch sensor to ensure good first-layer adhesion and prevent part deformation.
Sorry, you have not permission to write review for this product.
You can write your own disclaimer from APS Settings -> General -> Disclaimer Note.